Using Selective Scanning; Setting The No Scan Timeout; Setting The Aim Duration - Avery Dennison Monarch Pathfinder 6059 System Administrator Manual

Using Selective Scanning

Allows the scanner to scan subsets of bar codes.
Enabled Allows the scanner to scan subsets of bar codes.
(on)
Disabled Does not scan subsets of bar codes.
(Off)

Setting the No Scan Timeout

Sets the amount of time (in tenths of seconds) the scanner beam is on before turning off when
the trigger is pressed. The default is 30.
Select To
Increase the Increases the amount of time the scanner's beam is on when the trigger
setting is pressed.
Decrease the Decreases the amount of time the scanner's beam is on when the trigger
setting is pressed.

Setting the AIM Duration

Sets the duration (in tenths of seconds) of the aiming beam when the scanner is on. The
default is 0 (disables the AIM feature).
Select To
Increase the Increases the duration of the aiming beam when the scanner is on.
setting
Decrease the Decreases the duration of the aiming beam when the scanner is on.
setting
3-2 System Administrator's Guide
Classification: Avery Dennison – Public