Configuring Code 128 Bar Codes; Configuring I 2Of5 Bar Codes - Avery Dennison Pathfinder 6057 System Administrator Manual

Configuring Code 128 Bar Codes

1. To configure Code 128 settings, select Code 128 from the
Scanner Configuration window.
2. Enable each bar code you need to scan.
Allows the scanner to scan Code 128 bar codes.
Code 128
Allows the scanner to scan UCC/EAN-128 bar codes.
UCC/
EAN-128
Allows the scanner to scan ISBT 128 bar codes. Any
ISBT 128
length bar code is valid.
3. Touch Back to save all the settings and return to the Scanner
Configuration window.

Configuring I 2of5 Bar Codes

1. To configure I 2of5 settings, select I 2of5 from the Scanner Configuration window.
2. Enable each bar code you need to scan.
Allows the scanner to scan I 2of5 bar codes.
I 2of5
Tells the scanner to return the check digit with the data
Transmit
when an I 2of5 bar code is scanned.
CD
Tells the scanner to convert 14-character I 2of5 bar
Convert
codes into an EAN13 bar code.
to
EAN13
For the conversion to work, the following must occur:
 I 2of5 bar codes must be enabled.
 14 must be a valid length.
 The data must have a leading zero.
 The data must include an EAN13 check digit.
Tells the scanner to check the integrity of a scanned
Verify
I 2of5 bar code to ensure it complies with either USS or OPCC standards.
CD
Variable, specifies that I 2of5 bar codes can be any length.
Lengths
Sets the
Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.
length(s)
1 Fixed, specifies a single length for valid I 2of5 bar codes. The range for Length 1 is
for I2 of
2 – 99. The default is 14.
5 bar
2 Fixed, specifies two lengths for valid I 2of5 bar codes. The range for Length 2 is
codes.
2 – 99. The default is 0.
3. Touch Back to save all the settings and return to the Scanner Configuration window.
Configuring the Scanner 5-7