Avery Dennison Monarch Pathfinder 6059 System Administrator Manual page 34

Table of Contents

Advertisement

Error
Description
Code
261
Margin Adjustment is invalid.
262
Speed Adjustment is invalid.
287
Printhead W idth specification is out of range.
288
Printer voltage is out of range.
290
Backfeed action is invalid.
291
Backfeed position is invalid.
292
Backfeed distance is invalid.
380
Job request is invalid.
381
The printer cannot connect to the smart device. The maximum number of printers that
can connect via Bluetooth to one smart device is 7.
401
Internal software failure.
409
The printer's memory is full.
428
Invalid Batch or Graphic.
574
Check digit could not generate.
601
Failed to image.
614
The field is positioned off the label. This error is only reported when enabled.
615
PDF417 mode is invalid.
616
The printhead has too many bad dots to print.
680
Sound not found. The requested sound was not found on the printer. Refer to the
PlaySound method in the SDK documentation.
681
Sound queue full. The requested sound cannot be played because the sound queue is
full. Refer to the PlaySound method in the SDK documentation.
682
The sound replay count is invalid. The range is 1 to 8. Refer to the PlaySound method
in the SDK documentation.
703
The printer sensed a calibration of different-sized black marks. Make sure the correct
supply is loaded.
704
Printer has not sensed a supply mark within the specified number of inches or out of
supplies.
706
The printer's motor is jammed or encoder error.
750
Printhead is overheated. Turn off the printer to let the printhead cool. If the error
persists, call Technical Support.
751
Printer did not sense a black mark when expected. The supply may be jammed.
Reload supply. If the error continues to appear, call Technical Support.
752
Printer sensed a black mark in the wrong place.
753
Printer sensed a black mark that is too long.
755
Printhead is open.
756
The printer is out of supplies. Load supplies and/or clean the supply sensor.
758
Check supply. Either the supply is not seen, or the on-demand sensor is broken
(purchase optional). Check for a label jam. Clear the supply path or reload supplies.
5-4 System Administrator's Guide
Classification: Avery Dennison – Public

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents