Setting A Password - Avery Dennison Monarch Pathfinder Ultra System Administrator Manual

Tap the Authentication tab and specify the authentication security settings. The options a
5.
None, Kerberos, EAP-TLS, or PEAP.
These settings must match the network authentication settings or the printer can
connect.
Tap the Encryption tab and specify th
6.
The options are Open System (no security), WEP, or TKIP (WPA).
These settings must match the network encryption settings or the printer cannot conn
Tap the IP Config tab and select the IP type. The options are
7.
Tap the Power tab and adjust the radio transmission power, if neces
8.
When you are finished, tap OK. You return to the desktop.
9.
Tap , WLAN Profiles. The new profile is listed.
10.

Setting a Password

You can se t or change the Mobile Companion access p
Tap , Options.
1.
Tap Change Password.
2.
To enable password protection, enter and confirm a new password.
3.
To ch nge a curren a
new password.
To disable password protection, enter the current password but do n
password.
Tap OK.
4.
Tap X in the upper-right hand corner of the screen to exit the application.
5.
Not e: Make a note of the password if you change it. Setting a password restricts all access to
wirele ss features.
e encryption settings.
t password, enter the current password, then enter and confirm a
DHCP or Static.
sary.
assword. The default is Disabled.
ot specify a new
Configuring Wireless Settings 3-3
re
not
ect.