Adding Camera To Hik-Connect - HIKVISION DS-2CD23 Series Quick Start Manual

5.3

Adding Camera to Hik-Connect

Before You Start
You need to enable the Hik-Connect service on the camera before adding it to your Hik-Connect
account. Refer to Chapter 5.1.
1. Use a network cable to connect the camera to a router if the camera does not support Wi-Fi.
NOTE: After the camera connects to the network, wait one minute before attempting any
operation on the camera using the Hik-Connect app.
2. In the Hik-Connect app, tap "+" on the upper-right corner, and then scan the camera's QR
code to add the camera.
NOTE: You can find the QR code on the camera or on the camera's Quick Start Guide cover in
the package.
NOTE: If the QR code is missing or is too blurry to be recognized, you can also add the
camera by tapping the
3. Input your camera's verification code.
NOTE: The required verification code is the code you created or changed when you enabled
Hik-Connect service on your camera.
If you forget the verification code, you can check the current verification code on the
Platform Access configuration page via a Web browser.
4. Follow the prompts to set the network connection, and add the camera to your Hik-Connect
account.
NOTE: For detailed information, refer to the Hik-Connect app user manual.
QSG DS-2CD23xxxx-xx Turret 051420NA
Figure 53, Connect a Router
Figure 54, Scan QR Code
icon and inputting the camera's serial number.
38