Table of Contents
Advertisement
1. Power on the camera.
2. Connect the camera to your computer or the switch/router which your computer
connects to.
3. Input the IP address into the Web browser's address bar and press Enter to enter the
activation interface.
NOTES:
The default IP address of the camera is 192.168.1.64.
The computer and the camera should belong to the same subnet.
For cameras that enable DHCP by default, use the SADP software to search for the IP
address.
4. Create a password and input it into the password field.
STRONG PASSWORD RECOMMENDED−We highly recommend that you create a strong
password of your own choosing (using a minimum of eight characters, including upper
case letters, lower case letters, numbers, and special characters) in order to increase
the security of your product. We also recommend that you reset your password
regularly. Especially in high security systems, resetting the password monthly or weekly
can better protect your product.
5. Confirm the password.
6. Click OK to save the password and enter the live view interface.
Activation via SADP Software
SADP software is used for detecting the online device, activating the camera, and
resetting the password.
Get the SADP software from the supplied disk or the official Website, and install SADP
according to the prompts.
QSG DS-2CD23xxxx-xx Turret 051420NA
Figure 46, Activation Interface (Web)
32
Advertisement
Table of Contents
