Table of Contents
Advertisement
3.3
Modifying the IP Address
Purpose
To view and configure the camera via LAN (Local Area Network), you need to connect the network
camera in the same subnet with your PC.
Use the SADP software or client software to search and change the IP address of the device. We
take modifying the IP Address via SADP software as an example to introduce the IP address
modification.
For IP address modification via client software, refer to the client software user manual.
1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking the Enable DHCP checkbox.
You can enable the Hik-Connect service for the device during activation. Refer to
NOTE:
Chapter 5 for detailed information.
4. Input the admin password, and click Modify to activate your IP address modification.
NOTE:
SADP supports batch IP address modification. Refer to the SADP user manual for
details.
QSG DS-2CD23xxxx-xx Turret 051420NA
Figure 48, Modify the IP Address
34
Advertisement
Table of Contents
