Table of Contents
Advertisement
3). Separate the camera and the enclosure.
2. Install memory card.
1). Unscrew the memory card slot cover.
2). Insert the memory card.
3). (Optional) to unmount the memory card, push it in to eject it.
4). Screw the memory card slot cover back on.
3. Paste the drill template to desired mounting location.
4. Drill the screw holes (for expansion screws) and the cable hole on the ceiling according
to the drill template.
NOTE:
If the camera is installed on a wooden wall, use self-tapping screws instead of
expansion screws.
QSG DS-2CD23xxxx-xx Turret 051420NA
Figure 27, Disassemble the Camera
Figure 28, Install Memory Card
21
Advertisement
Table of Contents
