Advertisement
DEVICE FOR MANUAL OPERATION
Remove the lock cover (2) which allows inserting the key (1) to unlock the operator. Turn the key (1)
anticlockwise until it stops without forcing it and carry out the manual operation. To reset, turn the
key (1) clockwise until it stops without forcing it. Remove the key (1) and replace the lock cover (2).
WARNING: Carry out the manual operations with the motor off.
CE DECLARATION OF CONFORMITY FOR
MACHINES
(Directive 89/392 EEC, Attachment II, part B)
PROHIBITION OF OPERATION
The Manufacturer: GiBiDi Continental SRL,
Via Abetone Brennero, 177/B
I-46025 Poggio Rusco (MN)
Declares that the products: HYDRAULIC OPERATOR
"MODO 110" - "MODO 110/L"
-are constructed to be incorporated in a machine or to be
assembled with other machinery to construct a machine
considered modified by the Directive89/392 EEC;
- are not, however, in conformity with all the provisions as per
this Directive;
- are in conformity with the regulations of the following other
EEC Directives; Directive 73/23 EEC Directive 93/68 EEC -
Low voltage Directive 89/336 EEC Directive 92/31 EEC
Directive 93/68 EEC - Electromagnetic compatibility
and that
- the following (parts/clauses of) harmonised
regulations have been applied:
EN 60335-1 EN 60204-1 EN 55014 EN 61000-3-2
EN 61000-3-3 EN 61000-4-2 ENV 50141 EN
61000-4-4 EN61000-4-5 EN 61000-4-11 EN
551044
- the following (parts/clauses of) national
regulations and technical specifications have been
applied:
UNI 8612 - Italy
and furthermore, declares that it is not permitted to
start operation of the machinery until the machine
in which they will be incorporated or of which they
will become components has been identified, and
its conformity with the provisions of Directive
89/392 EEC and national legislation has been
declared, that is to say until the machinery as per
this declaration forms a single unit with the final
machine.
Poggio Rusco, 7 January 1997
Presidente Tiziano Toselli
Advertisement
