Related Manuals for GiBiDi MODO 110
Summary of Contents for GiBiDi MODO 110
- Page 1 HYDRAULIC OPERATOR “MODO 110 - 110/L” FOR SINGLE- OR DOUBLE-WING SWING GATES INSTRUCTIONS FOR INSTALLATION...
-
Page 2: General Warnings
GENERAL WARNINGS These warnings constitute an integral and essential part of the product and must be issued to the user. Carefully read the warnings in this paragraph since they supply important information concerning safety of installation, use and maintenance. Safely keep this handbook for any further consultation. INSTALLATION WARNINGS Installation, electrical connections and adjustments must be carried out by qualified technicians in observance of Good Techniques and in compliance with the regulations in force, in accordance with the... - Page 3 1 Antenna. 2 Electronic equipment container. 3 Screened coaxial cable. 4 Push-button panel; cable with 5 conductors of 0.5 mm². 5 Key-selector; cable with 3 conductors of 0.5 mm². 6 220-230V operators; power supply, cable with 4 conductors oF 1.5 mm²...
- Page 4 MOUNTING DIMENSIONS FOR THE SWING TO OPEN HOW TO WALL BRACKETS IN PILLARS OR TO WELD THEM ON A METAL STRUCTURE...
-
Page 5: Hydraulic Oil
MAKE AN ADEQUATE NOTCH IN THE PILLAR OR IN THE WALL ACCORDING TO DIMENSIONS «A» - «B» AS PER THE TABLE ON PREVIOUS PAGE. MODO 110 MODO 110/L POWER SUPPLY 220/230V - 50Hz 220/230V - 50Hz ABSORBED POWER 185 W... - Page 6 1) Valve for adjusting force during opening phase. 2) Valve for adjusting force during closing phase. WARNING Use a screwdriver to increase the When adjusting the force, force by rotating smoothly and radually rotate the valves without screwing them or counterclockwise the opening unscrewing them completely.
- Page 7 MOUNTING THE ELECTROLOCK 1 Electrolock 2 electrolock fixing plate 3 Bolt hooker 4 Bolt hooking rabbet 5 Bolt 6 Key cylinder (on request) 7 Gate...
-
Page 8: Ce Declaration Of Conformity For Machines
UNI 8612 - Italy Declares that the products: HYDRAULIC OPERATOR and furthermore, declares that it is not permitted to “MODO 110” - “MODO 110/L” start operation of the machinery until the machine in which they will be incorporated or of which they...