Advertisement
1 Antenna.
2 Electronic equipment container.
3 Screened coaxial cable.
4 Push-button panel; cable with 5 conductors of 0.5 mm².
5 Key-selector; cable with 3 conductors of 0.5 mm².
6 220-230V operators; power supply, cable with 4 conductors oF 1.5
mm² each.
7 Power supply line to equipment 220-230V 50-60Hz, cable with 3
conductors of min. 1.5 mm² (follow regulations in force).
8 220-230 V flashing light; cable with 2 conductors of 1,5 mm².
9 Shunt boxes.
10 Photocell transmitter; cable with 2 conductors of 0.5 mm².
11 Photocell receiver; cable with 4 conductors of 0.5 mm².
WARNING: It is important that an
omnipolar magneto-thermal switch
with acontact opening of minimum 3
mm is installed on the power supply
line, upstream of the equipment.
Advertisement
