Keysight N9020B Installation Note page 15
Mxa signal analyzer analog baseband iq inputs (option bba) upgrade kit
Hide thumbs
Also See for N9020B:
- User reference (3520 pages) ,
- Programmer's reference manual (2650 pages) ,
- Instruction manual (2530 pages)
Table of Contents
Advertisement
2. Refer to
Figure
9. Locate and install labels N9020-80036, "Remove Both Cables Before Lifting"
on the top of each board extractor, both the right and left hand side.
3. Route ribbon cable
to the front of the instrument.
4. Gently press the cable into place until it snaps into the connector of the BBIQ Main board.
Figure 9
Cable Installation
Installation Note N9020-90257
8121-1683
from the BBIQ Main board through the chassis side wall and out
Use the end of the cable furthest from the ferrite block.
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
15
Advertisement
Table of Contents
