Keysight N9020B Installation Note page 5

Mxa signal analyzer analog baseband iq inputs (option bba) upgrade kit

Hide thumbs Also See for N9020B:

Table of Contents

Tools Required

— T-10 Torx Driver

— T-20 Torx Driver

— 5/16-inch torque wrench

— 1/4-inch socket on 4 lb torque wrench

— scissors or knife

— diagonal cutters

— USB storage device with > 2 GB free memory

Keysight Service Center

The following kit items will not be installed in the analyzer upgrade and need to be shipped back to

the end user for their use:

— 5063-2143, Probe tip BNC adapter

— 8120-2682, cable

— Entitlement Certificate

Installation Note N9020-90257

Before you disassemble the instrument, turn the power switch to Standby and unplug the

instrument. Failure to unplug the instrument can result in personal injury.

Electrostatic discharge (ESD) can damage or destroy electronic components. All work on

electronic assemblies should be performed at a static-safe workstation. Refer to the

documentation that pertains to your instrument for information about static-safe workstations

and ordering static-safe accessories.

Option BBA, Analog Baseband I/Q Inputs Retrofit Kit

Table of Contents