Table of Contents
Advertisement
CAUTION!
Risk of pinching or minor cuts
– Do not transfer from the wheelchair when the
half tray is in horizontal position.
The half tray can be adjusted in width and swung
away.
4.4.1 Mounting the half tray
Mounting the half tray
B
1. Insert the tube of the half tray A into the attachment
B under the arm pad.
2. Push on the push pin C and insert the ring D on the
tube A.
3. Release the push pin C.
4.4.2 Adjusting the half tray
A
1. Slide the half tray A forwards or backwards to adjust to
the required depth.
CAUTION!
Risk of discomfort
– When adjusting the depth of the half tray,
make sure not to squeeze the stomach of
the user.
4.4.3 Add a half tray cushion
A cushion for the half tray can be placed on the half tray in
order to have a softer surface for the arms and elbows.
1536533-F
A
A
1. Place the cushion for the half tray A on the tray.
2. Place the attachment straps B into the plastic buckle
and around the half tray A.
4.5 Hemiplegic armrest
B
1. Loosen the screw A.
2. Remove the original armrest B.
3. Mount the hemiplegic armrest C in the armrest pole.
4. Re-tighten the screw A.
5. The hemiplegic armrest can be adjusted in angle. The
resistance can be increased/decreased by adjusting the
screw A.
WARNING!
Risk of damage
Damage on the armrest
– Do not put pressure on the front of the
armrest, as this could cause damage on the
armrest attachment.
4.6 Lateral positioning pads (for
adjustable backrest cover only)
WARNING!
Risk of trapping
– Be careful not to trap your trunk between the
two lateral positioning pads during front or
lateral transfers; when the user is moving in
the wheelchair.
B
C
A
A
Options
19
Advertisement
Table of Contents
