Reflex Variomat Service Instructions Manual page 19

21. Select the desired function:
• "No"
– Select this function for the master.
– The "29 Communication fault" message is output to
the floating contact.
• "Yes"
– Select this function for the slaves.
– The "29 Communication fault" message is not
output to the floating contact.
• Press "OK" to confirm.
The function for the respective device is selected.
Note!
You have completed the settings in the controllers when all parameters for the master and the slaves are entered.
– Ensure that all devices are set to Master/Slave operation.
Settings>Service>Master/Slave
(246) Block message 29 PFK?
No
Yes
2.9 bar
Master/Slave Operation — 24.09.2015
Controller
0 %
English — 19
OK