Reflex Variomat Service Instructions Manual page 18

Controller
18. Press "Max. level deviation".
19. Specify the value for the maximum level deviation for the
device tanks.
– This parameter is meaningless in the master and can be
ignored.
– Define the parameter in the slaves.
– Setting range 0–20 %.
– Use the buttons to enter the parameter value.
– Press "OK" to confirm.
20. Press "Block message 29 PFK".
18 — English
Settings>Service>Master/Slave
(244) Activation delay
(245) Max. level deviation
(246) Block message 29 PFK?
Settings>Service>Master/Slave
(245) Max. level deviation
Settings>Service>Master/Slave
(244) Activation delay
(245) Max. level deviation
(246) Block message 29 PFK?
Master/Slave Operation — 24.09.2015
2.9 bar 0 %
_5%
2.9 bar 0 %
2.9 bar 0 %
5s
5%
No
OK
5s
5%
No