Reflex Variomat Service Instructions Manual page 14

Controller
5. Use the scroll bar to navigate to the "Master/Slave" function.
6. Press "Master/Slave".
– The controller switches to the selected area.
7. Use the "▲" and "▼" keys to enter the code for accessing
the Master/Slave menu.
Code: ▼▼▼▲▲
–
– The controller opens the Master/Slave menu.
Note!
You are within the Master/Slave menu. Adjust the factory settings of the parameters to the device-specific conditions.
8. Press "Address".
– The controller switches to the address administration.
14 — English
Settings > Service
Master/ Slave >
Master controller >
SD card >
Master/ Slave >
Code input
Please enter
the code for
the Master/Slave
Settings>Service>Master/Slave
(240) Address
(241) Master/Slave
(242) Number of Slaves
(243) Max. pressure deviation
Master/Slave Operation — 24.09.2015
2.9 bar 0 %
C
2.9 bar 0 %
2.9 bar 0 %
OK
1
No
0
1 bar