Control Touch - Reflex Variomat Service Instructions Manual

5.2.2

Control Touch

Representation of a Control Touch controller using the example of a Variomat with one pump.
Enter the parameters as follows:
1. Switch on the main switch of the operating unit to activate
the controller.
2. Press "Setup Menu".
3. Press "Service >".
– The controller opens the Service menu.
4. Use the "▲" and "▼" keys to enter the code for accessing
the Service menu.
– Code: ▲▼▲▲▼
– The controller opens the Service menu.
STOP STOP
AUTO AUTO
Settings
Customer >
Service >
2.9 bar
Settings
Code input
Please enter
the code for
the Service menu
2.9 bar
Master/Slave Operation — 24.09.2015
Variomat VS 2.1
800l
25%
M
NSP
LIS
Continuous degassing
0 %
C
0 %
Controller
2.9 bar
System
OK
OK
English — 13