Level Mode; Analogue Mode - Promax -8 SE Manual

4.2.3.2.1

Level Mode

In the level Mode it appears a screen where the level of the input signal is
represented by a bar graph and in numeric value. (Figure 25.-).
The signal also can be audible through the loudspeakers, depending on the
option selected on the Configuration menu.
4.2.3.2.2

Analogue Mode

In the Analogue Mode can be taken three types of measures. Press the rotary
knob to switch among them. These measurements are:
- Video Carrier Measurement.
It shows the power level of the video carrier at the frequency tuned. It is
represented by a bar graph and in numeric value.
It also shows the V/A ratio and the C/N ratio in dB.
- Audio Carrier Measurement.
It shows the power level of the audio carrier at the frequency tuned. It is
represented by a bar graph and in numeric value.
It also measures the V/A ratio and the offset between the audio signal and the
video signal.
Page 28
90.90MHz CCIR
LEVEL 55 dBuV
40 60 80 100 120
20
Figure 25.-
C04 90.50MHz CCIR
VIDEO Carrier 62dBuV
V/A= 2 dB
C/N= 17 dB
40 60 80 100 120
20
Figure 26.-
USER'S MANUAL. PROMAX-8
SE
09/2013