Specifications - Promax -8 SE Manual

As a Spectrum Analyser it provides the analysis of the entire band, with a
span defined by the user from 1 to 100 MHz. Furthermore, it is possible to alter the
reference level, and to detect and maintain the maximum and minimum values for
INGRESS measurements.
The Transient Detector mode, permits to count the number of impulsive
interferences in the return path and with a level higher than a threshold defined by the
user. The maximum frequency range is from 5 to 100 MHz.
In designing the
multi-purpose, accurate, yet easy-to-use instrument. A simple keyboard gives direct
access to the various operating modes and, once in them, any measurement parameter
can be easily changed using the rotary selector/button.
In addition, it has an RS-232C terminal for connecting to a printer or computer
for producing reports on the measurements obtained.
The instrument is powered bymeans of an internal rechargeable battery.
All these functions have been brought together in one instrument weighing only
half a kilo. The ergonomic, sturdy design makes the
without parallel.
1.2

Specifications

TUNING
Tuning range
Tuning mode
Channel plan
Resolution
Indication
Channel frequency offset
POWER LEVEL MEASUREMENT (FULL BAND)
Measuring range
Bandwidth
Resolution
Accuracy
LEVEL MEASUREMENT
Measurement
Analogue channels
Digital channels
1
Under request carried out at the factory. (See option OP-008-61).
Page 2
PROMAX-8
SE, special attention was given to building a
From 5 to 863 MHz.
By channels or by frequency.
10 channel plans, each one with a maximum of 140
channels. Factory start-up channel plans: CCIR,
EIA, HRC, IRC, OIRL, CCIRUK, FCC, AUNA,
STD2L, AUST
10 kHz.
Graphic LCD with back lighting.
± 2 MHz (10 kHz resolution).
From 70 to 120 dBμV (From 10 dBmV to 60 dBmV).
From 5 to 863 MHz.
1 dB.
± 3 dB (From 5 to 40 °C).
Video carrier level measurement.
Power measurement in the channel bandwidth by
integration method.
USER'S MANUAL.
PROMAX-8
SE
( 1 )
, ONO.
PROMAX-8
SE
a working tool
09/2013