Promax -8 SE Manual page 70

The Edit Channel Plan function allows to automatically activate all the channels
defined in the channel plan by means of the ALL field on the third line. When to the
right of ALL we select ON, all the channels of the plan will be activated, otherwise, if we
select OFF all channels will be deactivated. In order to activate / deactivate a particular
channel, turn the rotary selector [9] until this one appears shaded and then press it, the
cursor will jump to the ON column, then turning the selector it will be possible to activate
it (it appears a cross) or to deactivate it (it does not appear a cross).
By means of the Edit Channel Plan function also it is possible to define
channels as analogue or digital. To do this, turn the rotary selector [9] until the channel
that you wish to modify appears shaded and then press it twice, the cursor will jump to
the DIG column, then turning the selector it will be possible to define it as digital
(appears a cross, channel C04 in the example of the previous figure) or as analogue (it
does not appear a cross). In the case of selecting it as digital it is possible to accede
directly to the digital channel configuration. In order to return to the Edit Channel Plan
function press the CONFIG [14] key.
After editing a channel, the ΔFCH feature appears at 0.00 MHz. It is the
displacement of the channel tuning for those channels that have their central frequency
displaced respect to the one of the standard system. You can vary it within a range from
-2.00 to +2.00 MHz.
Also this parameter (ΔFCH) can be edit in the channel configuration by means
of CONFIG CH-FR option.
In order to quit the Channel Edit press the key associated to the operation
mode which you wish to accede.
To modify the rest of characteristics of the channel plans it is necessary to have
the RM-010 software (optional accessory).
c) UNITS
PROMAX-8
The
and dBm.
d) TIME
To enter the time select the TIME field and press the rotary selector. Firstly, turn
the rotary selector to change the minutes field. Next press the selector again to
modify the hours and finally press it once again to confirm the new time.
e) DATE
To enter the date select the DATE field and press the rotary selector. First change
the year field, then the month and finally the day.
The parameters which may be modified on the second page of the global
configuration menu of the unit are as follows:
Page 16
SE permits to select the level units between dBmV, dBμV
USER'S MANUAL. PROMAX-8
SE
09/2013