Promax -8 SE Manual page 58

Digital channels
Measurement range
Analogue channels
Digital channels
Accuracy
CSO & CTB INTERMODULATION PRODUCTS MEASUREMENT
(ANALOGUE CHANNELS)
CSO
Measuring frequencies
CTB
DATALOGGER FUNCTION
Max. number of loggers
Number of channels/logger
Measurements
Analogue channels
Digital channels
SCAN
Span
Reference level
TILT
Indication
Analysed band
Number of pilots
Pilots frequency
Pilots resolution
SPECTRUM ANALYSER
Span
Reference level
Analysed band
Detector
Page 4
Ratio between the channel power and the noise
level. The frequency where noise is measured
is user definable in absolute or relative value. In
the relative mode, the unit takes as default
frequency offset the value BW/2.
40-50 dB for input level between 60 and 70 dBμV.
> 50 dB for input level > 70 dBμV.
> 30 dB for input level > 60 dBμV.
± 3 dB (5 — 863 MHz).
Ratio of the peak level of the video carrier to the
peak of the distortion products of second order
beat. Measured at four frequencies user definable.
User definable from -2.50 to 2.50 MHz. (Default
values -1.50, -0.75, 0.75 and 1.50 MHz).
Ratio of the peak level of the video carrier to the
peak of the distortion products of third order beat.
Measured at the carrier frequency or, approximately
mode, in a channel previously defined by the user.
55.
140.
Level, C/N and V/A.
Channel power.
Variable: 10, 30, 100, 300 MHz and full band (from
5 to 863 MHz, according to the channel plan).
Variable from 60 to 120 dBμV in 10 dB steps.
Numerical and by level bar.
Forward (5 to 863 MHz) or Return path (5 to
80 MHz).
4 per band.
From 5 to 863 MHz.
10 kHz.
From 1 to 100 MHz (1, 5, 15, 30, 50, 100 MHz).
Variable from 60 to 120 dBμV in 10 dB steps.
Forward (5 to 863 MHz) or Return path (5 to
80 MHz).
Peak or average.
USER'S MANUAL. PROMAX-8
SE
09/2013