Promax -8 SE Manual page 68

The TILT operating mode shows on the display, both graphically and
numerically, the level difference between any four channels, previously
defined as pilot channels, in order to obtain information about band
equalisation. This function can be applied to the forward band and to the
return path, independently.
To access any operating mode, simply press the corresponding key.
The parameters relative to a particular operating mode can be modified through
the configuration menu associated to the mode. In order to accede to the
configuration menu associated to a particular operating mode, simply press the
CONFIG key [14]. Some modes have more than one configuration page, to accede to
the second page it is necessary to press the CONFIG key again. The general
parameters of configuration (selecting/editing the channel plan, measurement units,
language, etc.) can be changed through the Global Configuration Menu, to which it is
acceded by pressing again the CONFIG key [14]. To leave a configuration menu, just
press the key of the operating mode you wish to accede.
Figure 4.- Accessing the
Page 14
USER'S MANUAL.
PROMAX-8
SE configuration menus.
PROMAX-8
SE
09/2013