RUGGEDCOM RSL910
Installation Guide
a
Connected internally.
b
Connected internally.
Ethernet Ports
Connect any of the available Ethernet ports on the device to a management switch and access the RUGGEDCOM
ROS console and Web interfaces via the device's IP address. The factory default IP address for the RUGGEDCOM
RSL910 is https://192.168.0.1.
For more information about available ports, refer to
Section 3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured. All configuration management
is done via the RUGGEDCOM ROS interface. For more information about configuring the device, refer to the
RUGGEDCOM ROS User Guide associated with the installed software release.
Configuring the Device
Pin
9
Chapter 4, Communication
Device Management
Name
Description
Reserved (Do Not Connect)
Ports.
Chapter 3
19