Raising The Mast - Nacra F18 Evolution Assembly Manual

4.2 Raising the mast

Tools needed:
- Wrench 11mm
Before raising the mast the boat should be
steady on level ground. If the surface is not
level, point both bows downhill. If the boat
is on a trailer be sure it is tied down and the
trailer tongue is secure to the hitch!
1. Check if all wires are on top of the trampoline in
between the hulls.
CAUTION: Check for overhead wires and
be sure the area behind the boat is clear of
people! A mast which comes in contact with
electrical power lines can cause serious in-
jury or death!
2. - Person 1 Holds the mast up with one
spreader arm facing downwards, so
the mastfoot doesn't hit the crossbar.
- Person 2 Place the mastbase on the mastball.
2
STEP 2
3. Mount the mast pin and splitrings in the
mastfoot.
4. - Person 1 Walks forward lifting the
mast and hand over the mast to 2.
- Person 2 Holds the mast with one
spreaderarm facing downwards.
STEP 4
2
1
1
27