Environmental; Input Power Electrical Data; Motor Control Electrical; Motor Control Performance - ABB EC Titanium Series Manual

Table of Contents

Advertisement

This chapter contains the technical specifications of the drive, the ratings, sizes and technical requirements.

12.1 Environmental

Motor Enclosure Rating
Drive Enclosure Rating
Operational ambient temperature ranges:
Storage ambient temperature range:
Maximum Altitude:
Maximum Humidity:
Vibration (Operating)
Vibration (Non-Operating)

12.2 Input Power Electrical Data

Supply Voltage Range
Supply Frequency
Inrush Current
Power Up Cycles
Single Phase Operation
Earth Leakage

12.3 Motor Control Electrical

Output Frequency Range
Output Voltage Range
Speed Regulation
Torque Control
Effective Switching Frequency
Acceleration Time
Deceleration Time

12.4 Motor Control Performance

V/F Mode
Speed Regulation:
Vector Mode
Static Speed Accuracy:
Speed Regulation
Torque Response:
Torque Linearity
MN448
TEFC/IP54 Motor with UL
Type 12/IP55 Drive
-10 ... 50°C (frost and condensation free)
-40 ... 60°C
2000 meters, de-rate above 1000m: 1% / 100m
95%, non-condensing
1 G Peak at 20 Hz
0.2G Peak at 20 to 50Hz
110 Volt Units – 110 – 115 Volt +10% / -10%
230 Volt Units – 200 – 240 Volt +10% / -10%
400 Volt Units – 380 – 480 Volt +10% / -10%
48 – 62Hz
< rated input current
>120x /hr, evenly spaced
Three phase drives can be operated from a single phase supply with 50%
derating of the maximum output current
When operating from a balanced three phase supply with the permissible
supply voltage range, touch current according to IEC61800-5-1 does not
exceed 3.5mA.
0 to 500Hz in 0.1 Hz steps
Max Output Frequency = Max Switching Frequency / 16.
0 to Supply Voltage
Open Loop < 2% motor rated speed
0 – 175% of rated torque, + / -5% accuracy, Response time <10ms
4 – 32kHz
0 – 600 seconds, 0.01s resolution
Two deceleration ramps
0 – 600 seconds, 0.01s resolution
+ / - 20% of motor slip with slip compensation enabled
+ / - 0.033%
0 – 100% Load Range: + / - 1%
1- 8ms
(10 – 90% of motor rated speed, 20 – 100% load torque
range): + / - 5%
Chapter 12
Technical Data
Technical Data 12-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents