Parameter Structure; Parameter Navigation - ABB EC Titanium Series Manual

This section provides an overview of how to access and change drive parameters. To monitor or change a parameter value
in the EC Titanium requires either the Remote Keypad described in Chapter 6 or the PC Software Tools detailed in this
section.

8.1 Parameter Structure

The parameters are arranged in Groups according the to the following structure.
   

8.2 Parameter Navigation

• Press and hold the NAVIGATE key for more than 1 second when the drive is displaying
PAr 5
, indicating the short (S) parameter group.
• Use the (Up) and
• To enter a parameter group, press and release the
• Use the (Up) and
• To change parameter values, press and hold the
required value.
• Press and release the
• Press and hold the
drive is stopped or the real-time information (e.g. speed, current or power) if the drive is running.
• To access Read Only Parameters, navigate to Par L Group and scroll to parameter 0000, then press and release the
navigate key.
MN448
Parameter Navigation and Groups
Short Parameter Group
Long Parameter Group
Advanced Group
Read Only Display Group
(Down) keys to select between the S, L or A parameter groups.
(Down) keys to change to the desired parameter number.
(Navigate) key once more to store the change.
(Navigate) key for more than 1s to return to real-time mode. The display shows
(Navigate) key while the group letter is flashing.
(Navigate) key then use the Up and Down Keys to change to the
Chapter 8
Basic Setup Parameters
Sequential List all Parameters
Access to Display Group
Advanced Motor Control
Parameter 0000 Par L Group
SToP
. The display changes to
SToP
Parameter Navigation and Groups 8-1
if the