Introduction; Purpose Of The Document; Preconditions - Keba Kemro TM 225/A Project Engineering Manual

TM 225/A
1

Introduction

1.1

Purpose of the document

This document describes the structure of the TM 225/A
(temperature measurement module).
Information
This manual is not adressed to end costumers! Necessary safety notes for
the end costumer have to be taken into the costumer manual in the respective
national language by the machine builders and system providers.
1.2

Preconditions

This document contains information for persons with the following skills:
Project engineer
Operator
Service technician
Project engineering manual V1.06
© KEBA 2011
Target group
Basic technical training (University of Applied Science/University level,
engineering degree or corresponding professional experience).
Knowledge in:
● working mode of a PLC,
● safety regulations,
● the application.
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
● safety regulations,
● working mode of machine or plant,
● principal functions of the application,
● system analysis and troubleshooting,
● setting options at the operating installations.
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
● working mode of a PLC,
● safety regulations,
● working mode of machine or plant,
● diagnosis possibilities,
● systematic error analysis and rectification.
Knowledge and skills pre-requirement
Introduction
7