Related Manuals for Keba Kemro NX 252/A
Summary of Contents for Keba Kemro NX 252/A
- Page 1 Kemro NX 252/A Ethernet PCI option module Project engineering manual V1.03 Translation of the original instructions...
- Page 2 KEBA GmbH Automation, Leonhard-Weiss-Straße 40, D-73037 Göppingen, Tel.: +49 7161 9741-0, Fax: +49 7161 9741-40, E-Mail: keba@keba.com KEBA Corp., 100 West Big Beaver Road, Troy, MI 48084, US, Tel.: +1 248 526-0561, Fax: +1 248 526-0562, E-Mail: usa@keba.com Beijing Austrian KEBA Science and Technology Development Ltd., Room B516, Nan Xin Cang Tower, A22 Dong Si Shi Tiao, Dong Cheng District, Beijing, 100027, P.R.
- Page 3 1.01 04-2009 EC directives corrected hasl 1.02 08-2010 EC directives and updated hasl standards, Declara- tion of conformity 1.03 08-2011 Introduction Hint "not for end customers" added, various minor up- fstl dates. Project engineering manual V1.03 © KEBA 2011...
-
Page 5: Table Of Contents
General procedures and safety principles..........20 10.2.2 EMC guideline..................20 10.2.3 Electrical safety and fire protection............20 10.2.4 Environmental and surrounding conditions..........20 10.3 Standards for the American market..............20 10.3.1 UL test for industrial control equipment..........20 Project engineering manual V1.03 © KEBA 2011... - Page 6 Table of Contents NX 252/A 11 Declaration of conformity....................21 Project engineering manual V1.03 © KEBA 2011...
-
Page 7: Introduction
Basic technical training (Vocational high school, engineering degree or corresponding professional experience). Knowledge in: ● working mode of a PLC, Service technician ● safety regulations, ● working mode of machine or plant, ● diagnosis possibilities, ● systematic error analysis and rectification. Project engineering manual V1.03 © KEBA 2011... -
Page 8: Intended Use
If you are using the KeStudio U3 tool suite: Doc.No. Name Target group ● Project engineer ● Electrician DE: 1000868 System manual Kemro automation ● Programmer system EN: 1000869 ● Commissioning foreman ● Service technician Project engineering manual V1.03 © KEBA 2011... -
Page 9: Safety Notes
It is absolutely essential to observe the safety instructions in the system manual. ● The module is defined as "open type equipment" (UL508) or as "offenes Betriebsmittel" (EN 61131-2) and must therefore be installed in a control cabinet. Project engineering manual V1.03 © KEBA 2011... - Page 10 When removed from it's casing this module is sensitive to electrostatic dis- charge. Before handling the modules touch a grounded metal object in order to discharge any static electricity from your body. Project engineering manual V1.03 © KEBA 2011...
-
Page 11: Description Of The Module
Information The module’s functionality is only guaranteed if used within a CP 24x/x or CP 25x/x. The module is not designed for connection with foreign modules. Front view Fig.3-1: NX 252/A front view Project engineering manual V1.03 © KEBA 2011... -
Page 12: Installation Instructions
The Ethernet PCI option module may not be plugged or removed if the CPU module is activated. Inserting an option module into slot 1) Turn off power supply 2) Remove dummy module 3) Insert module in the correct position (labelling right side) into the right-hand slot Project engineering manual V1.03 © KEBA 2011... - Page 13 NX 252/A Installation instructions Fig.4-2: Inserting the NX 252/A Removing an option module: 1) Turn off power supply 2) Pull module out of the slot 3) Insert dummy module Project engineering manual V1.03 © KEBA 2011...
- Page 14 Installation instructions NX 252/A Fig.4-3: Removing the NX 252/A Project engineering manual V1.03 © KEBA 2011...
-
Page 15: Connections And Wiring
Bi-Data - n.c. 5.1.2 Cable and plug specification Further information: See system manual. EMC and wiring guidelines Pay attention from the outset to careful wiring and shielding. Further information: See system manual. Project engineering manual V1.03 © KEBA 2011... -
Page 16: Configuration
Configuration NX 252/A Configuration No configuration is required for this module. Project engineering manual V1.03 © KEBA 2011... -
Page 17: Operating Behavior
Operating behavior Start-up after Power-On The module is passive and is configured and activated through the HOST. Reset The module can be reset by the HOST without the HOST itself having to be reset. Project engineering manual V1.03 © KEBA 2011... -
Page 18: Disposal
● The materials are recyclable in accordance with their labeling. You can make an important contribution to protecting our environment by reusing, renewing and recycling materials and old appliances. Project engineering manual V1.03 © KEBA 2011... -
Page 19: Technical Data
Modular 8-pin plug (RJ45 plug) Mechanics Structure: No casing; only front plate mounted on print When the module is plugged into CPU module, Protection class: then the CPU module conforms to IP 20 Weight: 23 g Project engineering manual V1.03 © KEBA 2011... -
Page 20: 10 Ec Directives And Standards
Programmable controllers - Part 2 10.2.4 Environmental and surrounding conditions EN 61131-2:2007 Programmable controllers - Part 2 10.3 Standards for the American market 10.3.1 UL test for industrial control equipment UL 508, 2005 Industrial Control Equipment Project engineering manual V1.03 © KEBA 2011... -
Page 21: Declaration Of Conformity
NX 252/A Declaration of conformity 11 Declaration of conformity Project engineering manual V1.03 © KEBA 2011...