biodex BioSway Operation Manual page 40

X
performInG a ctSIb teSt
(See Figures 7.4 – 7.7.)
To perform the CTSIB test, simply follow screen prompts.
Other points of interest:
1. Touch <More Options> to advance to the CTSIB Test Options screen if desired. Here you can
set the Test Trial Time, enter the number of trials and enter the Rest Countdown, and change
which conditions you want to test by simply touching to highlight the conditions you want to
do. You can also toggle the cursor ON/OFF. The Cursor should be OFF during the actual test.
Touch <OK> to confirm your selections and return to the CTSIB Testing screen.
• Use the < > or < M
routine the system will count down from the time setting selected).
• To set the number of trials or rest countdown, touch the appropriate key and then enter the
setting from the keypad displayed.
Press <OK> to continue to do the test. The Press <START> to being the testing sequence for each
condition.
Figure 7.4. The m-CTSIB Testing Options screen.
> keys to set the Test Trial time in five-second increments (during the
— 7-5 — TESTING