Getting Started; Display Panel Buttons; Screen Keys - biodex BioSway Operation Manual

5. GETTING STARTED

The BioSway software program is easy to master. Simply follow the screen prompts as they lead
you step-by-step through testing and training protocols or software utility options.
the maIn menu
(See Figure 5.1.)
To access the BioSway System Main Menu:
1. Press the <ON/STANDBY> button on the display to turn the BioSway ON.
2. There will be brief BIODEX splash screen prior to seeing the Main Menu screen.
3. The Main Menu allows the user to select the Training, Testing or Utilities menus.
4. If security code was enable – enter 781. (See Chapter 9, System Utilities, Configuration, for
more information on security code access.)
Figure 5.1. The Main menu.

dISplay panel buttonS

There are only three buttons located on the Display Panel. These buttons operate as follows:
1. <On/Standby> – <Power 0ff>: The only way to fully depower the BioSway is to disconnect
the AC adapter. When plugged in, the display still has power to it, even if it appears off. You
can bring up or "awaken" the display by simply touching the screen. The <On/Standby>
button will turn ON the display as well as turn it OFF.
2. The <Start> button is used to begin the selected training or testing protocol selected.
3. The <Stop> button is used to end the selected training or testing protocol selected.

Screen KeyS

The following on-screen touch keys are consistent whenever they appear throughout the entire
BioSway program.
• <HOME>: Touch this key to return to the Main Menu.
• <NEXT>: Touch this key to advance to the next logical screen.
• <BACK>: Touch this key to return to the previous screen.
• <OK>: Touch this key to confirm selections or entries and advance to the next screen.
PRELIMINARIES
— 5-1 — GETTING STARTED