System Specifications - biodex BioSway Operation Manual

SYSTEM SPECIFICATIONS

base to display connections
(See Figure 3.4.)
Connect the cable with the 15 pin Female D connector to the display. Connect the 15-pin Male D
connector at the opposite end of the cable to the base.
Figure 3.4. Base to display connections.
ac power connections
(See Figure 3.5.)
Plug the power supply into wall current. Plug the opposite end of the power supply into the
base unit. Insert plug and twist ? turn to lock.
Figure 3.5. AC power connections.
CONNECTIONS AND ADJUSTMENTS — 3-2 —