Connections And Adjustments - biodex BioSway Operation Manual

3. CONNECTIONS AND ADJUSTMENTS

The BioSway is quick and easy to assemble. Simply remove the shipping knob and store it in the
handle, connect the components as described on the connection instruction placard, and level
the platform as needed. The entire process should take only a few minutes.
Shipping Knob in
shipping position
Figure 3.1.
Figures 3.1 and 3.2. Remove the shipping knob and insert it into the handle for storage. Be sure to replace
the knob if transporting the system.
6
Figure 3.3. BioSway components shown in the optional hard case.
1. Foam pad
2. Cables
3. AC power adapter
4. Blindfold
5. Connection instruction placard
6. Base unit
7. Display unit (NOTE: Store this upside down in the optional hard case.)
8. Table Top Stand (included)
5
— 3-1 —
Shipping Knob in
storage position
Figure 3.2.
8
CONNECTIONS AND ADJUSTMENTS
1
7
2
3
4