Operation - biodex BioSway Operation Manual

2. OPERATION

4. Explain the training protocol to the patient, then press <Start> to begin the LOS training ses-
sion. The LOS Training screen reflects the patient's stability performance through the course
of the LOS training session. The Elapsed Time from the start of the training session is shown
at the top right of the display while the stability level is illustrated by a bar graph. A running
patient score is also provided in the upper right corner.
NOTE: If you have selected to enlarge the screen by touching the <Magnifying Glass>, you must
return to the normal viewing screen format to make any changes. At any time during the training ses-
sion, the "tracing" can be erased by pressing <Clear Tracing>. To stop the training session at any
time, press <Stop> on the display. The system will stop gathering data.
Figure 6.4. Touch the <Magnifying Glass> to enlarge the The Limits of
Stability (LOS) Training screen.
— 6-5 — THE TRAINING MODES