Communication Ports - Spectralink Ip-Dect Server 400/6500 - SpectraLink IP-DECT Server 200 Installation And Configuration Manual
Hide thumbs
Also See for IP-DECT Server 200:
- Installation and configuration manual (264 pages) ,
- Configuration manual (49 pages) ,
- Interoperability manual (31 pages)
Table of Contents
Advertisement
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
Communication Ports - Spectralink IP-DECT Server
400/6500
The Spectralink IP-DECT Server utilizes a number of different protocols and ports on the network
(see illustration below).
These ports MUST not be blocked by firewalls or other network equipment.
Example of protocols and ports for a Spectralink IP-DECT Server 6500:
*) Default configurable
**) If SIP per port registration is checked = 5060 + X (Number of SIP Registrations)
Spectralink IP-DECT Server 6500 system can utilize the following protocols:HTTP/HTTPS,
FTP/TFTP, UPnP, MSF (TCP port 56003), syslog (UDP port 514), NTP, LDAP and SNMP.
Tip:
Use the communication port illustration as a reference when configuring your network for
a Spectralink IP-DECT Server 6500 solution.
14215700-IG, Edition 15.0
May 2020, Original document
43
Advertisement
Table of Contents
Need help?
Do you have a question about the IP-DECT Server 200 and is the answer not in the manual?
Questions and answers