Direct Wall Mounting - Uniden EXV 958 Owner's Manual

Color profile: Disabled
Composite Default screen
!
Use ONLY the Uniden AC
adapter supplied with
this phone.
!
DO NOT use an outlet
controlled by a wall switch.
CAUTION
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the
battery. Refer to "Charging
the Battery Pack," page 6.
I:...exv958final.vp
Fri Jun 19 20:14:58 1998

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your
phone directly on a wall. Before doing this, consider the
following:
Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a hazard
when inserting screws into the wall.
Mount your phone within 10 feet of a working phone jack.
Make sure the wall material can support the weight of the base
and handset. Use anchoring devices if necessary.
Use the #10 screws included with the wall mount adapter kit.
1) Insert 2 mounting screws 3-15/16 inches apart.
Allow about 3/16 of an inch between
the wall and screw heads
for mounting the phone.
2) Follow "Standard Wall
Plate Mounting"
steps 1 through 4
on page 4.
3) Plug one end of the
telephone cord into the TEL LINE jack on the base. Put the
cord inside the molded channel on the bottom of the base.
4) Place the base on the screws and push down until it's
firmly seated.
5) Plug the AC adapter into a standard 120 VAC wall outlet.
DO NOT use an outlet controlled by a wall switch.
6) Before you plug the other end of the telephone cord into the
modular jack on the wall, charge the battery. Refer to
"Charging the Battery Pack," page 6.
5