Setting Up And Adjusting Your Phone; Desk/Tabletop Installation - Uniden EXV 958 Owner's Manual

Color profile: Disabled
Composite Default screen
TIP
Before choosing a location
for your phone, read the
"Installation Considerations"
included in the "Precautions
and Important Safety
Instructions" brochure.
I:...exv958final.vp
Fri Jun 19 20:14:53 1998

Setting Up and Adjusting Your Phone

SETTING UP

DESK/TABLETOP INSTALLATION

1) Plug the AC adapter cord into the 9 VDC input jack on the
back of the base.
Place the power cord so that it does not create a
trip hazard or become chafed and create a fire
or electrical hazard.
2) Plug the AC adapter into a standard 120 VAC wall outlet.
Use only the Uniden AC adapter supplied with this phone.
DO NOT use an outlet controlled by a wall switch.
3) Charge the battery (refer to "Charging the Battery Pack,"
page 6).
4) Plug one end of the long telephone cord into the TEL LINE
jack on the back of the base.
5) Plug the other end of the cord into your telephone jack
on the wall.
6) Place the base on a desk or tabletop. Then, place the handset
into the base. The base must lay down in the base as shown.
7) Raise the base antenna to the
vertical position.
3