Storing A Phone Number In Memory - Uniden EXV 958 Owner's Manual

Color profile: Disabled
Composite Default screen
TIP
When the voice prompt says
"Enter the phone number
you want to store," if you do
not make an entry within 10
seconds, the handset beeps
and the programming
procedure cancels.
TIP
When the voice prompt says
"Say yes or no," if you don't
say anything within 6
seconds, you will hear
"louder please." If you still
don't respond, the handset
beeps and the programming
procedure cancels.
TIP
If you need a pause to
separate groups of numbers
during dialing, press
pause
This 4 second counts
pause
as one digit. Pressing
pause
more than once increases
the length of the pause
between numbers.
14
I:...exv958final.vp
Fri Jun 19 20:20:17 1998

STORING A PHONE NUMBER IN MEMORY

With VoiceDial, programming is easy. Just follow the
preprogrammed voice prompts.
1) Remove the handset from the base.
2) Press .
store
The LED blinks and the
talk
monitor LED lights.
You will hear:
For example: Press 0, then 1.
NOTE: To automatically select the first available (empty)
memory location, press 0, then 0.
3) You will hear:
Example: say "John Smith."
Then, 2 times, you will hear:
To confirm, repeat the name, "John Smith."
If you don't respond within 6 seconds, you will hear
"louder please." If you still don't respond, the handset
beeps and the programming procedure cancels.
NOTE: You can skip the VoiceDial and enter a phone
number in memory without a name. Enter the number on
the keypad, then press
4) You will hear:"On the keypad, enter the phone number
then press ."
.
store
Use the keypad to enter the number
you want to store (up to 16 digits).
For example: enter 555-5555;
then press .
store
5) You will hear:
Then, you will hear a confirmation beep.
"Store mode. Enter the
2-digit memory location."
"Say the name you want to store."
"Please repeat."
(go to step 5).
store
"On the keypad, enter the
store
phone number then press
"555 5555 stored memory 01."
."