Wall Installation - Uniden EXV 958 Owner's Manual

Color profile: Disabled
Composite Default screen
HINT
Before choosing a location
for your phone, read the
"Installation Considerations"
included in the "Precautions
and Important Safety
Instructions" brochure.
CAUTION
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
!
DO NOT use an outlet
controlled by a
wall switch.
4
I:...exv958final.vp
Fri Jun 19 20:51:58 1998

WALL INSTALLATION

Standard wall plate mounting
This phone can be mounted on
a standard AT&T or GTE wall
plate. To attach the wall
mount adapter to the base:
1) Slide the wall mount adapter
into the notches at the top
of the base.
2) Pivot the wall mount adapter down and snap into place.
3) Plug the AC adapter into the base.
4) Wrap the AC adapter cord around
the strain relief notch. Then,
put the AC adapter cord
inside the molded wiring
channel. Plug the
AC adapter into
a standard 120 VAC
wall outlet.
5) Plug one end of the short telephone cord
into the TEL LINE jack on the base.
Place the telephone cord inside
the molded channel on the bottom
of the base.
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the battery.
Refer to "Charging the
Battery Pack," page 6.
6) Place the base on the posts of the
wall plate and push down until
it is firmly seated.
AC
Adapter