Table of Contents
Advertisement
Color profile: Disabled
Composite
Default screen
TIP
When the voice prompt says
"Enter the phone number
you want to store," if you do
not make an entry within 10
seconds, the handset beeps
and the programming
procedure cancels.
TIP
When the voice prompt says
"Say yes or no," if you don't
say anything within 6
seconds, you will hear
"louder please." If you still
don't respond, the handset
beeps and the programming
procedure cancels.
TIP
If you need a pause to
separate groups of numbers
during dialing, press
pause
This 4 second
counts
pause
as one digit. Pressing
pause
more than once increases
the length of the pause
between numbers.
I:...Backup of exv958final.vp
Fri Jun 19 21:14:39 1998
STORING A MIXED MODE NUMBER
If your phone service is set up for pulse
dialing, you can store a mixed mode
number to easily access
automated services (such as banking)
that require tones within their systems.
1) Remove the handset from the base.
2) Press
. The
store
You will hear:
For example: Press 0, then 1.
NOTE: To automatically select the first available (empty)
memory location, press 0, then 0.
3) You will hear:
For example: say "My Bank."
Then, 2 times,
you will hear:
To confirm, repeat the name "My Bank."
NOTE: To enter a number into memory without a name,
skip voice entry and go to step 4.
4) You will hear:
Enter the number you want to store in pulse mode on
.
the keypad.5) Press
6) Enter the number to be dialed in tone
mode (such as an account number).
For example: 1 2 3 4.
7) Then press
store
8) You will hear:
Then, you will hear a confirmation beep.
LED blinks.
talk
"Store mode. Enter the
2-digit memory location."
"Say the name you want to store."
"Say the name you want to store."
"Please repeat."
"On the keypad, enter the
phone number then press
(tone) on the handset.
.
store
."
15
Advertisement
Table of Contents
