Uniden EXV 98 Owner's Manual
Uniden EXV 98 Owner's Manual

Uniden EXV 98 Owner's Manual

Cordless telephone integrated with voicedial technology

Advertisement

Quick Links

C O N T E N T S
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Included in Your Package . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting Up and Adjusting Your Phone . . . . . . . . . . . . . . . . . . 3
• Desk or Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . 3
• Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Direct Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• Installing the Handset Battery Pack . . . . . . . . . . . . . . . . . 6
• Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . 6
• Setting the Pulse/Tone Switch . . . . . . . . . . . . . . . . . . . . . 7
• Adjusting Ringer Controls . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Automatic Digital Code Security . . . . . . . . . . . . . . . . . . . . 8
• Ringer On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Page/Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Attaching the Beltclip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Cleaning Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 9
Standard Use of Your New Phone . . . . . . . . . . . . . . . . . . . . 10
• Making & Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . 10
• Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Flash & Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Monitor Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• Voice Memory Entry Tips . . . . . . . . . . . . . . . . . . . . . . . . 13
• Storing a Mixed Mode Number . . . . . . . . . . . . . . . . . . . . 15
• Erasing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . 16
• Dialing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . 16
• Reviewing Numbers in Voice Memory . . . . . . . . . . . . . . 17
• Dial Announce On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
NOTE: Foldout the back cover of this owner's manual to use the
handy "Controls and Functions" page for reference.

Advertisement

Table of Contents
loading

Summary of Contents for Uniden EXV 98

  • Page 1: Table Of Contents

    C O N T E N T S Introduction........1 •...
  • Page 2: Introduction

    INTRODUCTION Introduction WELCOME Congratulations on your purchase of the Uniden EXV 98 cordless telephone integrated with VoiceDial technology. We designed this phone to exacting standards to provide you reliability, long life, and outstanding performance. This phone comes in two colors, charcoal (EXV 98) and ivory (EXV 98I).
  • Page 3: Included In Your Package

    WARNING If any of these items are Rechargeable Battery Short Telephone Cord missing or damaged, contact the Uniden Parts Department at (800)554-3988, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday, or contact us on the web at www.uniden.com.
  • Page 4: Setting Up And Adjusting Your Phone

    When using on a flat surface, DO NOT lay the handset down on the base. 8) Raise the base antenna to the vertical position. DESK/TABLETOP INSTALLATION Use only the Uniden AC adapter supplied with this phone. DO NOT use an outlet controlled by a wall switch.
  • Page 5: Wall Installation

    Before you plug the other NOTE: DO NOT use an end of the telephone cord outlet controlled by a into the modular jack on wall switch. the wall, charge the battery (refer to “Charging the Battery Pack,”...
  • Page 6: Direct Wall Mounting

    4. end of the telephone cord into the modular jack on 3) Plug one end of the short telephone cord into the TEL LINE the wall, charge the jack on the base. Put the cord inside the molded channel on battery.
  • Page 7: Installing The Handset Battery Pack

    When wall mounted, hang the handset on the cradle. Use only the Uniden battery (BT-098) supplied with your phone. Before using your phone for the first time, fully charge the rechargeable Nickel-Cadmium battery pack. We recommend...
  • Page 8: Setting The Pulse/Tone Switch

    Rechargeable batteries can develop a reduced charge capacity caused by repeated charge and discharge cycles. NOTE Rechargeable batteries that have developed this effect will not operate to their fullest capacity. Allow 15 to 20 hours without interruption for To avoid memory effect, before recharging, operate the unit the handset to fully until the rechargeable battery completely discharges.
  • Page 9: Adjusting Ringer Controls

    With no call in progress, press The phone has 3 ringer tones with 2 volume levels - one soft and one loud. Each time you press tone changes. Each time you press volume changes. While on a call, press IMPORTANT The phone has two receiver volume You can change the levels - one soft and one loud.
  • Page 10: Ringer On Or Off

    The ringer is on when the switch is in the RING ON position. To turn off the ringer, move the switch to the BATT SAVE position. Now, when a call comes in, the ringer will be silent. To locate the handset (while it’s off the base), press base.
  • Page 11: Standard Use Of Your New Phone

    STANDARD USE Standard Use of Your New Phone AutoTalk allows you to answer a call by just removing the handset from the base eliminating the need to push buttons or flip switches. Standard Calls 1) Press 2) You will hear: Enter the 2-digit memory location number (01-30).
  • Page 12: Chain Dialing

    CHAIN DIALING On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as an account number. You can enter this number into a memory location. 1) Store the access code into one of the memory numbers.
  • Page 13: Programming Your Phone's Voice Memory

    Programming Your Phone’s Memory VOICEDIAL PROGRAMMING The monitor mode feature lets you listen to the convenient voice prompts through the handset speaker rather than the earpiece. Monitor mode is automatically enabled when you press the voice/mem a number, the to program or the to indicate that the monitor mode is on.
  • Page 14: Voice Memory Entry Tips

    VOICE MEMORY ENTRY TIPS VoiceDial is “speaker (voice) dependent” - it’s designed to recognize the voice that programmed the name. If you program a memory location for “pizza delivery” and another VoiceDial is the world’s person tries to VoiceDial “pizza delivery,” the phone may not first fully integrated speech recognize the new voice.
  • Page 15: Storing A Phone Number In Voice Memory

    With VoiceDial, programming is easy. Just follow the preprogrammed voice prompts. When the voice prompt says 1) Remove the handset from the base. “Enter the phone number you want to store,” if you do 2) Press not make an entry within 10 seconds, the handset monitor LED lights.
  • Page 16: Storing A Mixed Mode Number

    STORING A MIXED MODE NUMBER If your phone service is set up for pulse dialing, you can store a mixed mode number to easily access automated services (such as banking) When the voice prompt says that require tones within their systems. “Enter the phone number you want to store,”...
  • Page 17: Erasing A Stored Number

    1) Remove the handset from the base. When the voice prompt says “Replace memory 2) Press [location number]. Say yes You will hear: or no,” if you don’t say anything within 6 seconds, you will hear “louder please.” If you still don’t 3) Enter the 2-digit memory location number that you want to respond, the handset beeps erase.
  • Page 18: Reviewing Numbers In Voice Memory

    REVIEWING NUMBERS IN MEMORY 1) Press 2) You will hear: For example: You’ve programmed John Smith’s phone number, 555-5555, into memory location 01. Press HINT 3) To dial the announced number, simply press When you are ready to the last digit. talk on the phone, press monitor to turn off monitor mode.
  • Page 19: Dial Announce On/Off

    For faster dialing, you can turn off the “Dialing [number]” announcement. DIAL ANNOUNCE ON/OFF To turn the “dialing” announcement off Press and then . You will hear a confirmation store beep. The dialing announcement is off. To turn the “dialing” announcement on Press and then .
  • Page 20: Troubleshooting

    T R O U B L E S H O O T I N G TROUBLESHOOTING If your cordless telephone is not performing to your expectations, please try these simple steps first. P R O B L E M You can hear the caller, but •...
  • Page 21 Handset does not fully charge. • If the phone is desk or tabletop installed, make sure the handset is in the vertical position and the contacts are touching. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday.
  • Page 22: Specifications

    Specifications SPECIFICATIONS GEN ERA L The EXV 98 complies with FCC Parts 15 and 68. Frequency control: PLL Modulation: FM Operating temperature: -10º to 50º C B A S E Receive frequency: 902.078 to 904.030 MHz (40 channels) Transmit frequency: 925.999 to 927.950 MHz (40 channels) Power requirements: 9 V 210 mA (from AC adapter) Size: 5-1/2 in.(W) x 2-1/4 in.
  • Page 23: Controls & Functions

    CONTROLS & FUNCTIONS Earpiece talk Talk with LED voice/mem channel Voice Memory with LED Tone pqrs Store oper Review store Flash flash ringer Ringer Speaker Microphone status Ringer On/Off Switch RING BATT SAVE Channel monitor Monitor with LED wxyz Cancel cancel pause Pause...

Table of Contents