Operation
Material-dependent slip – entering the measured values
Figure 104
6 If the measured values differ from the specified size, enter these measured values in the ‛Actual Width
(X)' and ‛Actual height (Y)' fields.
In the example above the measured values are 227 x 46. The printer must output the rectangle 0.44 %
larger in order to reach the required output size.
7 To check the dimensions, insert a DEK 5/5 MC-10 NEUTRAL WS MultiCard in the printer again.
8 Click the [Print Adjusted Rectangle] button.
9 When the dimensions are correct, confirm your inputs with the [OK] button.
10 Next adjust the MultiCard type (see the following section).
90
1449820000/1.4/04.17