Weidmuller PrintJet ADVANCED User Manual page 20

Printer description
Combined with the marking software
M-Print® PRO, the ink-jet printer PrintJet
ADVANCED is a marking system for MultiCards and
MetalliCards.
This system can be used for the individual marking
of equipment quickly and conveniently. The
PrintJet ADVANCED uses a brilliant permanently-
readable printing process to print MultiCard-
formatted markers for switching devices, machines,
terminal blocks, cables, wires, and valves. A secure
and permanent label is ensured through high-level
resistance to smearing and scratching, UV-stability,
and the high printing resolution for all markers. The
PrintJet ADVANCED allows you to print very small
fonts. Even the smallest characters are easy to read,
permitting you to increase the markers' information
density.
The MultiCards can be fed individually or inserted as
stack (of up to 30 MultiCards) into the loader.
MetalliCards should only be inserted individually.
Stack processing is not intended for MetalliCards.
The MetalliCard is inserted into an inlay for
processing.
20
The MultiCard fed into the printing unit is printed with
a thermally-hardened ink and then transferred to a
fixation unit.
In the fixation unit, the ink is then hardened with a
special heat radiator. The duration of this process is
varies for MultiCards and MetalliCards.
Finally, the MultiCard/MetalliCard is fed out of the
PrintJet ADVANCED onto the output rail and can be
removed.
The MultiCard/MetalliCard can be used immediately.
Please note that the MultiCards and MetalliCards
become hot due to the fixation process. If
necessary, let them cool down before removing
them from the output rail.
The PrintJet ADVANCED should not be switched
off. If the PrintJet ADVANCED is not used, it
automatically goes into standby/energy-saving
mode. This optimizes the cleaning cycles and thus
increases the availability of the printer.
1449820000/1.4/04.17