Operation
5.2.3
Setting the printer correction
The printer correction must only be set once. It does not depend on the MultiCard type.
1 From the menu bar choose Tools → Printer Settings → Set Printer Correction...
2 Insert, for example, a DEK 5/5 MC-10 NEUTRAL WS MultiCard in the printer (also see section "5.1.2
Inserting MultiCards/MetalliCards").
Figure 101
Setting the printer correction
3 Print a rectangle of the specified size (228 x 46 mm) by pressing the [Print Rectangle] button.
4 Remove the printed MultiCard from the printer.
5 Measure the size of the printed rectangle.
1449820000/1.4/04.17
87