Safety Measures For Environment Protection; Symbols And Information Used On The Device - Weidmuller PrintJet ADVANCED User Manual

Safety information
• Install ink cartridges in the printer immediately
after removing them from the packaging. The
print quality can be impaired if an ink cartridge is
left unpacked for any length of time before use.
• Ink is used when a new ink cartridge is inserted
or when the ink tank lid is opened, as the printer
always carries out a reliability check.
• Always handle ink cartridges with care, otherwise
ink could spill and cause soiling.
2.3 Safety measures for
environment protection
Recycling in accordance with WEEE
B-to-B disposal
Purchasing our product gives you the opportunity to
return the device to Weidmüller at the end of its
service life.
The EU Directive 2002/96 EC (WEEE) regulates the
return and recycling of waste electrical and
electronics equipment. In the business-to-business
sector (B-to-B), manufacturers of electrical
equipment have been obligated since August 13,
2005 to take back and recycle free of charge all
electrical equipment sold after that date. After that
date, electrical equipment must not be disposed
through the 'normal waste disposal channels'.
Electrical equipment must then be disposed of and
recycled separately.
All devices that fall under the directive must feature
this symbol:
14
2.4 Symbols and information
used on the device
The following information and symbols are attached
to the printer:
Hot surface warning
This symbol warns of a burn hazard
due to hot surfaces.
Crush hazard
This symbol warns of a crush hazard,
for instance to your hands.
Automatic start-up warning
This symbol warns of automatic printer
startup.
Insertion instructions
This symbol displays the correct
insertion direction of the MultiCards.
Warning label on the device
Important information
Keep all safety and hazard signs on
the device clean and renew them, if
necessary.
1449820000/1.4/04.17