General Operating Information - Weidmuller PrintJet ADVANCED User Manual

2.2 General operating
information
• When selecting the installation site for the printer,
ensure the ambient conditions are suitable (also
see chapter "9.1 Technical data").
• The openings in the enclosure of the printer must
not be blocked or covered over.
• Do not switch off the printer! The printer
automatically goes into standby mode. The
operating parameters are only retained while the
printer is turned on. These parameters ensure,
for example, that the printhead is cleaned
optimally.
Switching off the printer may result in the ink
cartridge nozzles becoming blocked.
• Do not open the ink tank lid during operation.
• Print some MultiCards/MetalliCards every week.
This is the only way to preserve print quality.
• Only use products that have been produced or
approved by Weidmüller (M-Print® PRO
software, MultiCards/ MetalliCards and ink
cartridges). Otherwise no liability can be
assumed for the quality and durability of printing
.
NOTE
The Weidmüller warranty does not cover
faults or damage to the printer resulting
from the use of unapproved or
unsuitable accessories or consumable
materials.
Handling ink cartridges
• Keep ink cartridges out of reach of children.
• Never allow children to play with ink cartridges.
• Printer ink is not suitable for human consumption.
No not allow ink to come into contact with the
mucous membranes.
• If you accidentally swallow any ink, rinse out your
mouth and drink plenty of water. Do not induce
vomiting.
• Always handle used ink cartridges with care as a
small amount of ink could remain in the ink
supply outlet. If you get ink on your skin, wash
thoroughly with soap and water.
1449820000/1.4/04.17
• Never touch the ink supply outlet of the ink
cartridge or the area around it.
• Do not shake ink cartridges, as this may cause
ink to leak.
• Do not disassemble or try to refill ink cartridges.
• Store unopened ink cartridges in a cool and dry
place, preferably in a refrigerator at about 4 °C.
• Before using an ink cartridge that has been
stored in a colder place, allow the cartridge to
stand at room temperature for at least three
hours.
• Only remove ink cartridges from the printer when
they are empty or their use-by date has expired.
Removing an ink cartridge can cause leaks in the
connection between the ink cartridge and the ink
line. This can lead to a faulty ink feed system.
• Never use out-of-date ink cartridges.
When the use-by date of the ink approaches
(printed on the packaging), a message is
displayed at the touch panel. Replace the
specified ink cartridge (see section "6.2
Replacing ink cartridges"). Use all the ink in the
ink cartridge by the date stated on the label to
achieve the best print results.
NOTE
Using expired ink reduces the print
quality and can cause damage to the
printer.
Safety information
13