Software Settings; Starting M-Print® Pro - Weidmuller PrintJet ADVANCED User Manual

5.2

Software settings

The following settings must be made via the M-Print® PRO software.
To determine some settings, it is necessary to print a MultiCard.
The printed MultiCard can be cleaned with cold water and used again.
Important information
The MultiCard is not cured in this process.
The ink can be wiped off easily.
Make sure that you do not get your clothes dirty.
5.2.1 Starting M-Print® PRO
Start M-Print® PRO via the program icon on the desktop or via Start → Programs → Weidmüller → M-Print®
PRO.
Figure 92 M-Print® PRO program icon on the desktop
1449820000/1.4/04.17
Operation
81