Decommissioning The Printer; Packing The Printer - Weidmuller PrintJet ADVANCED User Manual

Transporting the printer
8.1 Decommissioning the
printer
Figure 181 Switching off the printer
A On/off switch
1 Switch off the printer at the On/Off switch (A).
2 Disconnect all cables from the printer.
a Power cable
b Network cable or USB cable
3 Remove the remaining MultiCards from the
loader.
4 Prior to transporting the printer, ensure that the
ink cartridges have been inserted correctly.
5 Fold down the touch panel and secure it with
adhesive tape.
6 Secure the ink tank lid with adhesive tape.
7 Remove the output rail.
152
8.2

Packing the printer

Important information
Only use the original packaging when
transporting or dispatching the printer
over long distances (e.g. relocating).
Only then can the best protection be
guaranteed for the printer during
transport.
If you no longer have the original
packaging, you can order a packaging
kit from Weidmüller under the order
number 1408670000 PJ ADV VP SET.
NOTE
Because of its weight the printer must
always be carried by two people.
Always hold the printer at the front
and rear when carrying it.
1 Place the printer in the polystyrene packaging
material
2 The carefully place the printer into the cardboard
box.
3 Put the printer accessories into the cardboard
box.
4 Close the cardboard box.
1449820000/1.4/04.17