General Safety Information - Weidmuller PrintJet ADVANCED User Manual

Safety information
WARNING
Failure to observe the safety
information below may have serious
consequences:
• Risk to persons due to electrical and
chemical hazards
• Failure of functions.
Read the safety and hazard information
in this section thoroughly before putting
the printer into operation.
In addition to the information specified in
this user manual, the plant
operator/machine operator must comply
with national occupational health and
safety regulations.
It is also important to follow in-house
rules and regulations.
2.1

General safety information

In the following cases, you must disconnect the
printer from all sources of power and contact a
qualified service technician:
• The power cable or plug are worn or damaged.
• Liquid has penetrated the PrintJet ADVANCED.
• The PrintJet ADVANCED has fallen down or the
enclosure has been damaged.
• The performance of the PrintJet ADVANCED is
not up to the required standard, e.g. poor print
quality or insufficient resistance to smearing and
scratching.
CAUTION
Never remove the printer enclosure!
There is a potential risk of injury!
Only qualified service technicians should
replace components inside the device.
12
NOTE
Damage to the device!
The printer enclosure should not be
removed.
Opening the enclosure will result in the
loss of any warranty rights!
Only qualified service technicians should
replace components inside the device.
• Always read and understand the user manual
before commencing operation and maintenance
tasks at the printer.
• Only use the printer for its intended purpose (see
section "2.5 Intended use").
• Keep all safety and warning signs on the printer
clean and renew them, if necessary.
• Only trained personnel are allowed to use the
printer.
• Always keep the user manual with the product for
future reference. It must be ensured that
everyone involved with the device is able to view
the user manual at any time.
1449820000/1.4/04.17