Notational Conventions - Weidmuller PrintJet ADVANCED User Manual

Introduction
This user manual provides all the information you
need for trouble-free operation of the PrintJet
ADVANCED (hereafter called printer or device).
This user manual must be read, understood, and
followed by members of staff before commencing
work, maintenance tasks, cleaning, and
troubleshooting at the printer. This applies, in
particular, to any safety information.
After reading the user manual you will be able to
• operate the printer safely,
• clean the printer correctly,
• take appropriate action in the event of a fault.
In addition to this user manual, it is necessary to
comply with the general laws and other regulations
concerning accident prevention and environmental
protection in the country of use.
This user manual is an integral part of the printer.
It must be kept with the printer throughout its service
life.
1.1

Notational conventions

Passages of this operating manual that require
special attention or are a direct hazard warning are
shown as follows:
DANGER
Electrical hazard warning
This warning sign indicates an electrical
hazard.
Only qualified and authorized electrical
specialists are allowed to work on
electrical equipment.
WARNING
This warning indicates a potential
hazard which, unless avoided, could
involve a medium risk of death or
(serious) injury.
8
CAUTION
This warning sign indicates a low risk
situation which, if not avoided, could
result in minor or moderate injury.
NOTE
This warning indicates a hazard which,
unless avoided, could involve a low risk
of material damage.
Important information
This symbol indicates information about
a printer function or setting, or that due
care and attention are required. It also
indicates information which must be
followed at all times.
The following notational conventions are also used:
•
Text following this mark represents an item in
a list.
- Text following this mark represents
subordinated lists.
1
Several activities which must be executed in
the specified sequence are marked by
consecutive numbering.
[ ] Buttons which must be actuated in the
software are shown in square brackets.
This symbol or text in " " refers to other
chapters and sections in this user
manual or to other documents.
1449820000/1.4/04.17